The problems you easily overlook when using the chainsaw are here


01. Use reliable lubricating oil

For chain saw use, lubrication of the chain and guide bar is very important. The chain must always have a small amount of oil thrown out, never work without the chain being lubricated. If the chain runs dry, the cutting tool can quickly become damaged beyond repair.

02. Operation method

Be sure to check the lubrication of the chain before starting work, and fill up the chain lubricating oil every time you add fuel. It must be ensured that every time the fuel is used up, there is still a little remaining lubricating oil in the chain lubricating oil tank. If the amount of oil in the lubricating oil tank does not decrease, it may be caused by the blockage of the lubricating oil passage. At this time, check the lubrication of the chain and clean the oil circuit.

03. Regular inspection

Check the tension of the chain frequently, a new chain will need to be tightened more frequently than a chain that has been in service for a longer period of time.

index_FEATURED_PRODUCTS